Shipping all across India now!
/

OPTIMO NEBULIZER

1,600

BIPAP AUTO ST Mode With Humidifer & Full Face Mask

Efficent humidification technology brings up to 40% relative humidity increase under standard environment,while heating tube can effectively prevent condensated water.It makes every breath warm,humid and comfortable.

50 in stock

50 in stock

OXY0010

Description

Nebulization Method:Air Compression
Tension:Input voltage:

100V-240V;50Hz/60HZ

Output voltage: 5.0V

Consumption:2.0A
Maximum Capacity of the

Nebulization Chamber:

 6ml
Diameter of the particle:0.5 to 10 µm MMAD: 3 µm
Weigh:0.26kg
Dimensions:118x63x63 mm
Operation’s Temperature

and Humidity:

10°C to 40°C (50°F to 104°F);

10 to 85% RH

Temperature and Humidity

of storage and Transportation:

-20°C to 70°C (-4° to 158°F); 10 to 85% RH
Average Nebulization Rate /Flow Solution: 0.2ml/min
Noise Level:≦55 dBA
Intensity of Maximum Pump

Pressure Compression:

12 to 16Psi

(82 to 110 KPa / 0.82 to 1.1bar)

Operating Atmospheric

Pressure Range:

5 to 8 Psi

(34 to 55 KPa / 0.34 to 0.55 bar)

Range of Operation Flow:3 ~ 6 lpm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Enquiry

Quick Comparison

SettingsOPTIMO NEBULIZER removeHUMIDIFIER BOTTLE removeBIPAP MASK removePhilips BIPAP AVAPS Machine removeBLOOD PRESSURE MONITOR removeOxymed Bipap Machine remove
Image
SKUOXY0010OXY00016OXY00015OXY0006OXY0011OXY0007
Rating
Price

1,600

300

2,000

65,000

1,600

60,00067,000

Stock

50 in stock

50 in stock

50 in stock

Out of stock

50 in stock

50 in stock

Availability50 in stock50 in stock50 in stockOut of stock50 in stock50 in stock
Add to cart

DescriptionBIPAP AUTO ST Mode With Humidifer & Full Face Mask Efficent humidification technology brings up to 40% relative humidity increase under standard environment,while heating tube can effectively prevent condensated water.It makes every breath warm,humid and comfortable.Medical device used to humidify oxygen, increases humidity or moisture and decrease dryness of supplemental oxygen during therapy and emergencies with oxygen supplying system.Non-invasive ventilation accessory used to deliver oxygen  when connected to CPAP or BiPAP machines. Covers the full face, ensuring an airtight seal and effective ventilation therapy even when the patient is breathing through the mouth.Philips Respironics BiPAP AVAPS Non-Invasive ventilator provides the comfort of pressure ventilation and the consistent efficacy of assured tidal volume.BIPAP AUTO ST Mode With Humidifer & Full Face Mask Efficent humidification technology brings up to 40% relative humidity increase under standard environment,while heating tube can effectively prevent condensated water.It makes every breath warm,humid and comfortable.BIPAP AUTO ST Mode With Humidifer & Full Face Mask Efficent humidification technology brings up to 40% relative humidity increase under standard environment,while heating tube can effectively prevent condensated water.It makes every breath warm,humid and comfortable.
Content
Nebulization Method:Air Compression
Tension:Input voltage: 100V-240V;50Hz/60HZ Output voltage: 5.0V
Consumption:2.0A
Maximum Capacity of the Nebulization Chamber: 6ml
Diameter of the particle:0.5 to 10 µm MMAD: 3 µm
Weigh:0.26kg
Dimensions:118x63x63 mm
Operation's Temperature and Humidity:10°C to 40°C (50°F to 104°F); 10 to 85% RH
Temperature and Humidity of storage and Transportation:-20°C to 70°C (-4° to 158°F); 10 to 85% RH
Average Nebulization Rate /Flow Solution: 0.2ml/min
Noise Level:≦55 dBA
Intensity of Maximum Pump Pressure Compression:12 to 16Psi (82 to 110 KPa / 0.82 to 1.1bar)
Operating Atmospheric Pressure Range:5 to 8 Psi (34 to 55 KPa / 0.34 to 0.55 bar)
Range of Operation Flow:3 ~ 6 lpm
Dimensions18 x 14 x 10 cm (7 x 5.5 x 4 inch)
Breath Rate0-30 beats per minute
Warranty2 Years
On-Board Data Storage Capacity (Min.)Upto 3 months
Electrical Requirements100-240 (50/60) V AC (Hz)
Data Storage Capacity Display (Min.)Compliance VIC, 1, 7 and 30 day averages
Compliance MeterBreathing detection
HumidificationIntegrates with System One 60 Series humidifier and System One 60 Series Heated Tube humidifier
Flex Pressure Relief0 to 30 (S-mode)
Ramp Time0 to 45 min (5-min increments)
Weight Without Humidifier1.36 kg
FiltersFoam and optional ultra-fine
Device SetupLCD/control wheel/push button
Data Storage Capacity SD Card1 Year
Altitude CompensationAutomatic
MiscellaneousLighted LEDs
Pressure Range (cm H2O)EPAP 4-25 cm ‎H₂O; IPAP 4-25 cm ‎H₂O; CPAP 4-20 cm ‎H₂O
Ramp Rate (mins)4 to EPAP min
Measuring range Pressure: 0 to 280 mmHg(in 1 mmHg increment) Pulse: 40 to 199 beat/minute
Static accuracy Pressure: +-3mmHg Pulse: +-5% of reading
Measuring resolution 1mmHg
Rated Power Input AC200V-50/60Hz Output DC6V
Operation temperature 5~40o c/41~104o F
Operation humidity 15%~85%RH maximum
Storage temperature -20~+55o C/-4~+131o F
Storage humidity 10%~95%RH maximum
Dimension 173X91X49+-1.0 mm
Weight 420g+-5g(including batteries and cuff)
Cuff pressure display range 0~290mmHg/0~38.7kpa
PRODUCT SPECIFICATIONS
  • Brand : Oxymed
  • Humidity : Five level control of temperature and humidity
  • Humidifier : In built
  • Mode of Operation : S/T
  • Pressure Range : 4-25 cm H20
  • Ramp : Adjustable from 0 -45 mins
  • Smart on/off : Breathing Trigger
  • Data Management : 2 Years of sleeping data, 14 days of detailed data for clinical / Medical research.
  • Warranty : 2 Years
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping